Ga konge ER milling Chuck Ṣeto
ER milling Chuck set is a high-konge collet Chuck set, awọn collets jẹ ti kojọpọ orisun omi, nitorinaa wọn le di iwọn awọn titobi pupọ.Eto Chuck yii jẹ pipe fun lilo pẹlu awọn ọlọ ati awọn ẹrọ konge miiran.
| Bere fun No. | Iho Iwon | PCS/SET | |
| inch | mm | ||
| ER16-8ni(mm) | 3/32 1/8 3/16 7/32 1/4 5/16 11/32 3/8 | 2 3 4 5 6 7 8 10 | 8 |
| ER25-6ni(mm) | 1/8 3/16 5/16 3/8 1/2 5/8 | 4 6 8 10 12 16 | 6 |
| ER25-10ni(mm) | 3/32 1/8 3/16 1/4 5/16 3/8 7/16 1/2 9/16 5/8 | 3 4 5 6 8 10 12 14 15 16 | 10 |
| ER32-6ni(mm) | 1/4 5/16 3/8 1/2 5/8 3/4 | 6 8 10 12 16 20 | 6 |
| ER32-12ni(mm) | 3/32 1/8 3/16 1/4 5/16 3/8 7/16 1/2 9/16 5/8 11/16 3/4 | 3 4 5 6 8 10 12 14 15 16 18 20 | 12 |
| ER40-8in(mm) | 1/8 1/4 3/8 1/2 5/8 3/4 7/8 1 | 3 5 8 12 15 18 22 26 | 8 |
| ER140-15in(mm) | 1/8 3/16 1/4 5/16 3/8 7/16 1/2 9/16 5/8 11/16 3/4 13/16 7/8 15/16 1 | 3 4 5 6 8 10 12 14 15 16 18 20 22 24 26 | 15 |
O tẹle ti Fa Bar
| Taper ti collet Chuck | O tẹle igi iyaworan | |
| R8 | 7/16 | 20UNF | |
| 7:24 30 | M12× 1.75 | 1/2 | 13 UNC |
| 7:24 40 | M16× 2.0 | 5/8 -11 UNC |
| 7:24 50 | M24× 3.0 | 1 ₩-8UNC |
| MS2 | M10×1.5 | 3/8 -16 UNC |
| MS3 | M12× 1.75 | 1/2 | 13 UNC |
| MS4 | M16× 2.0 | 5/8 -11 UNC |
| MS5 | M20×2.5 | 3/4 | 10 UNC |
| MS6 | M24× 3.0 | 1 -8UNC |
Jọwọ ṣe akiyesi okun ti igi iyaworan collet Chuck ati sipesifikesonu ti collets (metric tabi inch)
Jọwọ leti ipari ti shank taara ati dia.
A ni idunnu lati pese awọn akojọpọ ati awọn chucks pẹlu oriṣiriṣi oriṣiriṣi ati awọn iwọn ni ibamu si ibeere rẹ.
